- Ideal for pedaling a fatbike through the harshest conditions - 14-speed internal rear hub drivetrain system shifts under load - Disc compatible: requires Rohloff specific 4-bolt rotor (sold separately) - Reliable, low-maintenance internal design for reduced wear - Highly efficient with no gear overlap and maximum ratio range - Shift indexing originates at the hub, instead of the shifter - Includes 14-speed twist shifter, 16t cog, cables, and housing Technical data - Suitable for 170mm frame spacing (10mm diameter axles) - Quick-release (CC) or bolt-on (TS) axle options - Chainline = 71.5mm (15,16 & 17 tooth sprockets), beltline = 72.25mm - Flange spacing (middle-middle) = 93mm - 32 spokes - Disc-brake compatible (DB) - Anodized black finish - XL version is not authorized for tandem use - Weight: 1805 grams

• 24 spokes • 10-speed

The DT Swiss 240s Center Lock hub hits the sweet spot between light weight and reliability. Whether you're racing or just getting around town on a singlespped, the 240s will roll for thousands of nearly frictionless miles. The short freebody lets you dial in your perfect chainline for quiet, smooth pedaling. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

Ready for everything from XC racing to enduro charging, the DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

The DT Swiss 240s MTB Center Lock Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.

DT Swiss' strong, reliable 540 Tandem Rear Hub is built for the long haul. Whether you're out there for a week, a month, or on a daily commute, the high-end bearings, renowned DT Star Rachet internals, and additional spoke holes deliver thousands of nearly frictionless miles on your tandem or fully-loaded touring rig.

- Oversized carbon shell bonded to oversized flanges allow for shorter spokes and reduced spoke wind-up resulting in a stiffer, stronger wheel build - Front hubs include 15mm and 20mm thru-axle endcaps - Rear hubs include 10x135 QR, 12x135 Thru-Axle, and 12x142 Thru-Axle - Rear hubs feature 6 degree engagement for fast power transfer, and inserts in the cassette drive to reduce cassette marring - International Standard 6-bolt mounting configuration - Shimano/SRAM 8-10sp, Shimano 11sp Mountain cassette compatible

The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.

Finally, a hub worthy of the X0 name! Built to roll over the toughest mountain terrain, SRAM's X0 Boost Hub proves that being solid doesn’t mean being sluggish. SRAM's double time ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise Speedball bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, SRAM went the extra mile on the X0 Boost Hub—so you have less to worry about on the trail. • Boost 148 x 12mm axle diameter • Tapered aluminum axle is strong and light • 32-hole • XD driver body for 11-speed compatible hubs • Weight: 250 grams

The DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between light weight and reliability. The straigh tpull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock rotor attachment makes installing and removing rotors fast and simple.

The DT Swiss 240s Straightpull road hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive 11-speed Shimano-compatible wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. Lace it up and hit the road.

For optimum wheel strength and reliability, Shimano's Dura-Ace Rear Freehub is made of cold-forged aluminum with an oversize shell, sturdy flanges, a titanium freewheel body and a 15mm internal axle. Inside, diamond-polished bearing races and stainless-steel ball bearings minimize rolling resistance, while high-tech seals keep out water and dirt for maximum durability. This hub also features tool-free bearing adjustment for easy maintenance, plus a light and strong aluminum/steel quick-release skewer.

DT Swiss' 350s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock attachment makes installing and removing disc rotors simple and fast.

- Race-proven BMX Race hubs with 20mm 7075-T6 aluminum axles and axle nuts - Cold-forged, CNC 6061-T6 aluminum shells with sealed cartridge bearings - 32mm dropout interface washers increase stiffness - Rear accepts any standard threaded freewheel

- Axle/Spacing: 10/14 x 135mm nutted - International Standard 6-bolt disc rotor mount - 11 tooth (1/8") steel cog is pre-installed, ideal for compact drivetrain setup - Tough, instant pickup 120 point triple wedge pawl system with a bushed mini threaded driver for Singlespeed and Dirt Jump - Bushed driver is more durable than cartridge bearings - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame), 14mm adapters included

When you demand the best, choose Shimano's XTR FH-M9010 Rear Hub. - Double contact bearing seals - Super polished bearing races for low friction rolling - Light-weight and corrosion resistant titanium freehub body with Shimano "Quick-engagement" feature - Cone and ball bearings with races perfectly ground by a Cubic Boron Nitride tool for smooth rolling durability - 12mm E-thru Axle system designed to be durable enough for all-mountain riding while remaining light enough for XC racing - Hub/Brake Compatibility: Center Lock Disc - Not compatible with Shimano 11-Speed Road cassettes

- Axle/spacing: 12 x 150/157mm - Oversized shell and massive flanges allow for shorter spokes and reduced spoke wind-up resulting in a stiffer, stronger wheel build - Includes 12x150mm and 12x157mm endcaps - Freehub features 6 degree engagement for fast power transfer - International Standard 6-bolt mounting configuration - Shimano/SRAM 8-10sp, Shimano 11sp Mountain cassette compatible

- Weight: 250g - Hole: 36-hole - Pro quality BMX Race/Dirt/Street/Park hubs - Forged/CNC 6061-T6 aluminum shell with sealed cartridge bearings - MXRC SupaDrive-Cassette rear uses 120-point triple wedge pawl system with a bushed singlespeed cassette freehub (15mm hollow alloy axle with 3/8" bolts) - Halo FatFoot cogs are recommended for SupaDrive-Cassette rear

In BMX racing, the first few seconds out of the gate are the most important, so Shimano's DXR Hub delivers super-quick engagement to get you the holeshot. This 36-hole hub rocks a tough steel axle, and Shimano's legendary durability ensures that whether you're hammering or sticking huge landings this robust hub holds up ride after ride.

The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

The DT Swiss 240s Straightpull 6-Bolt hub hits the sweet spot between light weight and reliability. The straightpull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles.

SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.

The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

DT Swiss' strong, reliable 540 Tandem Front Hub is built for the long haul. Whether you're out there for a week, a month, or on a daily commute, the high-end bearings and additional spoke holes deliver thousands of nearly frictionless miles on your tandem or fully-loaded touring rig.

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.

Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors